LIV DBB INJECTION BALL VALVE
SERIES IB13
With 2 ball valves for isolation and 1 needle valve for bleed and an injection quill.
- The valve body is machined from a round bar stock material or from forged material standard.
- The raw material of the valve can be supplied according to NORSOK M 630 or to customer´s specific requirements.
- The valve spindle is anti-blow out design with PTFE back seat gaskets.
- The injection valve has a ball with 10 mm bore.
- The ball valves have PEEK seats. The ball is polished for low friction and has a 10 mm bore.
- The process connection is flanged with ½” injection quill.
- The injection connection is ½” NPT int. Quill size is ½” sch. 80.
- The handle has a plastic sleeve for protection.
- The dust covers are coloured for application indication (vent)
- The valves are designed for PED 2014/68/EU.
- Size: 1″ – 2″
- Pressure rating: 150 lbs – 2500 lbs
- Inlet connection: 1/2″ NPT int.
- Material: AISI 316 (standard), A350LF2, 22Cr Duplex, 25Cr Duplex, 6 M0, Titanium, other materials on request.
- Packing: PTFE, PEEK
- Temperature: ÷40 to +260 ᵒC
- Operation: Handle, T-bar, or anti-tamper or anti-tamper lockable.
- Coating: standard offshore, to customer’s spec., or none
- Material certificate to EN 10204-3.1 and 3.2
- Certificate of compliance to NACE MR 01-75 or EN 15156
- PMI test
- Pressure test certificate
- Fire safe tested acc. to EN 10497, API 607, BS 6755 part 2, ISO 5208
- Penetrant test on valve body to ASME BPV, ISO 3452-1 2021
- Fugitive emission to ISO 15848-1
- Option: cleaned for oxygen and hydrogen
The simple way to order
SELECT CONFIGURATION AND SEND INQUIRY
FOR SPECIAL INQUIRIES, PLEASE REACH OUT TO OUR SALES TEAM AT SALES@LISBERGVALVES.DK OR +45 70 60 61 20
Not what you were looking for?
